Price Negotiable Stock High-Speed 10g SFP+ Lr Transceiver Module for Reliable Networking

PRICE: US$13.50-14.00 10 Pieces (MOQ)

Product Description

 10Gb/s 10km SFP+ Optical Transceiver Module

Features

.   Hot Pluggable

.   LC Duplex optical interface

.   1310nm DFB transmitter, PIN receiver

.  Operating case temperature:

Commercial:0 to 70 °C

Industrial:-40 to 85 °C

.   Low power consumption

.   Applicable for 10km SMF connection

.   All-metal housing for superior EMI performance

.   Advanced firmware allow customer system encryption

.   Information to be stored in transceiver

.Cost  effective  SFP+  solution,   enables  higher  port densities and greater bandwidth

.   RoHS compliant (lead free)

Applications

.   10GBASE-LR/LW

. Other optical links

Standards

.   IEEE 802.3ae 10GBASE-LR/LW

. SFF-8431

.   SFF-8472

Description

This 1310nm DFB 10Gbps SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km.

 The SFP+ 10km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI.

Parameter	Symbol	Min	Typ	Max	Unit
Case Operating Temperature Range	Tc	-5	–	70	°C
		-40	–	85
Power Supply Voltage	Vcc	3.14	3.3	3.46	V
Supply Current	Icc	–	–	300	mA
Data Rate	BR	–	10.3125	–	Gbps

Transmitter Electrical Characteristics
Parameter	Symbol	Min	Typ	Max	Unit
Differential Input Voltage Swing	VIN	180	–	700	mV
Tx Differential Input Impendence	ZIN	–	100	–	Ω
Transmitter Disable Voltage	VDIS	2.0	–	VCC+0.3	V
Transmitter Enable Voltage	VEN	0	–	0.8	V
TFAULT Logic High	VTFH	2.4	–	VCC	V
TFAULT  Logic Low	VTFL	VEE	–	VEE+0.4	V
Receiver Electrical Characteristics
Parameter	Symbol	Min	Typ	Max	Unit
Differential output Voltage Swing	VOUT	300	–	850	mV
Rx Differential Output Impendence	ZOUT	–	100	–	Ω
LOS Assert Voltage	VLOSA	2.4	–	VCC	V
LOS De-assert Voltage	VLOSD	VEE	–	VEE+0.4	V

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Transmitter Characteristics
Laser Type		DFB
Center Wavelength Range	λ	1260	1310	1355	nm
Spectral Width@-20dB	Δλ	–	–	1	nm
Side Mode Suppression Ratio	SMSR	30	–	–	dB
Launch Optical Power	Pout	-8.2	–	0.5	dBm	1
Extinction Ratio	ER	3.5	–	–	dB
Relative Intensity Noise	RIN	–	–	-128	dB/Hz
Eye Diagram	Complies with IEEE802.3ae eye masks when filtered
Receiver Characteristics
Receiver Type		PIN
Operating Central Wavelength	λ	1260	–	1610	nm
Receiver Sensitivity	Sen	–	–	-14.4	dBm	2
Receiver Overload	PSAT	0.5	–	–	dBm
Receiver Reflectance	RFL	–	–	-12	dB
LOS Assert	LOSA	-30	–	–	dBm
LOS De-Assert	LOSD	–	–	-17	dBm
LOS Hysteresis	LOSH	0.5	3	5	dB
Notes

Pin	Symbol	Description	Notes
1	VEET	Transmitter Ground	1
2	TFAULT	Transmitter Fault	2
3	TDIS	Transmitter Disable. Laser output disabled on high or open	3
4	SDA	2-wire Serial Interface Data Line	2
5	SCL	2-wire Serial Interface Clock Line	2
6	MOD_ABS	Module Absent. Grounded within the module
7	RS0	Rate Select 0. Not Used.	4
8	RX_LOS	Loss of Signal indication. Logic 0 indicates normal operation	2
9	RS1	Rate Select 1. Not Used.	4
10	VEER	Receiver Ground	1
11	VEER	Receiver Ground	1
12	RD-	Receiver Inverted DATA out. AC Coupled.
13	RD+	Receiver Non-inverted DATA out. AC Coupled.
14	VEER	Receiver Ground	1
15	VCCR	Receiver Power Supply
16	VCCT	Transmitter Power Supply
17	VEET	Transmitter Ground	1
18	TD+	Transmitter Non-Inverted DATA in. AC Coupled.
19	TD-	Transmitter Inverted DATA in. AC Coupled.