This 1550nm cooled EML 10Gbps SFP+ transceiver is designed to transmit and receive optical data over sin- gle mode optical fiber for link length 40km. The SFP+ 40km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI.
PRICE: US$66.00-68.00 10 Pieces (MOQ)

Product Description
10Gb/s 40km SFP+ Optical Transceiver Module
Features
. Hot Pluggable
. LC/UPC Duplex optical interface
. 1550nm cooled EML transmitter, PIN receiver
. 1.2G to 11.3G bit rates
. Low power consumption<1.5W
. Up to 40km SMF length
. All-metal housing for superior EMI performance
. Cost effective SFP+ solution, enables higher port densities and greater bandwidth
. RoHS compliant (lead free)
. Operating case temperature Commercial : 0 to 70 °C
Industrial: -40 to 85 °C
Applications
. 10GBASE-ER/EW
. CPRI
. Other optical links
Standards
. IEEE 802.3ae 10GBASE-ER/EW
. SFF-8431/SFF-8472
. CPRI
Description
This 1550nm cooled EML 10Gbps SFP+ transceiver is designed to transmit and receive optical data over sin- gle mode optical fiber for link length 40km.
The SFP+ 40km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI.
| Parameter | Symbol | Min | Typ | Max | Unit |
| Power Supply Voltage | Vcc | -0.5 | 4 | V | |
| Storage Temperature Range | Ts | -40 | 85 | °C | |
| Relative Humidity – Storage | RHS | 0 | 95 | % | |
| Relative Humidity – Operating | RHO | 0 | 85 | % | |
| Data Rate | BR | – | 10.3125 | – | Gbps |
| Parameter | Symbol | Min | Typ | Max | Unit |
| Case Operating Temperature Range | Tc | 0 | – | 70 | °C |
| -40 | – | 85 | |||
| Power Supply Voltage | Vcc | 3.14 | 3.3 | 3.46 | V |
| Supply Current | Icc | – | – | 450 | mA |
| Data Rate | BR | 1.25 | 10.3125 | 11.3 | Gbps |
| Parameter | Symbol | Min | Typ | Max | Unit | Notes |
| Transmitter Characteristics | ||||||
| Laser Type | EML | |||||
| Center Wavelength Range | λ | 1530 | 1550 | 1565 | nm | |
| Side Mode Suppression Ratio | SMSR | 30 | – | – | dB | |
| Launch Optical Power | Pout | -4.7 | – | 4 | dBm | 1 |
| Average launch power of OFF transmitter | POFF | – | – | -30 | dBm | |
| Extinction Ratio | ER | 8.2 | – | – | dB | |
| Transmitter and dispersion penalty | TDP | – | – | 3 | dB | |
| Relative Intensity Noise | RIN | – | – | -128 | dB/Hz | |
| Eye Diagram | Complies with IEEE802.3ae eye masks when filtered | |||||
| Receiver Characteristics | ||||||
| Receiver Type | PIN | |||||
| Operating Central Wavelength | λ | 1530 | 1550 | 1565 | nm | |
| Receiver Sensitivity | Sen | – | – | -16 | dBm | 2 |
| Receiver Overload | PSAT | 0.5 | – | – | dBm | |
| LOS Assert | LOSA | -30 | – | – | dBm | |
| LOS De-Assert | LOSD | – | – | -19 | dBm | |
| LOS Hysteresis | LOSH | 0.5 | dB | |||
| Notes | ||||||
| Pin | Symbol | Description | Notes |
| 1 | VEET | Transmitter Ground | 1 |
| 2 | TFAULT | Transmitter Fault | 2 |
| 3 | TDIS | Transmitter Disable. Laser output disabled on high or open | 3 |
| 4 | SDA | 2-wire Serial Interface Data Line | 2 |
| 5 | SCL | 2-wire Serial Interface Clock Line | 2 |
| 6 | MOD_ABS | Module Absent. Grounded within the module | |
| 7 | RS0 | Rate Select 0. Not Used. | 4 |
| 8 | RX_LOS | Loss of Signal indication. Logic 0 indicates normal operation | 2 |
| 9 | RS1 | Rate Select 1. Not Used. | 4 |
| 10 | VEER | Receiver Ground | 1 |
| 11 | VEER | Receiver Ground | 1 |
| 12 | RD- | Receiver Inverted DATA out. AC Coupled. | |
| 13 | RD+ | Receiver Non-inverted DATA out. AC Coupled. | |
| 14 | VEER | Receiver Ground | 1 |
| 15 | VCCR | Receiver Power Supply | |
| 16 | VCCT | Transmitter Power Supply | |
| 17 | VEET | Transmitter Ground | 1 |
| 18 | TD+ | Transmitter Non-Inverted DATA in. AC Coupled. | |
| 19 | TD- | Transmitter Inverted DATA in. AC Coupled. |
Sageconnect is a reliable provider of IT network system integration and solutions for global enterprise customers.
Copyright © 2024 starsurge mellanox network. Powered by starsurgemellanox network.